What cut pieces are used to cut marble?

Marble is one of the indispensable materials in decoration. Marble is hard and brittle. If it is difficult to cut with ordinary tools, diamond cutting pieces can perfectly solve the cutting problem. Because of its high hardness, diamond cutting pieces are particularly suitable for cutting materials with high hardness, so it is most suitable to use diamond cutting pieces to cut marble.

The cutting edge of the diamond cutting blade is coated with a layer of metal when leaving the factory. Before use, this layer of metal needs to be scraped off to expose the diamond particles inside.
Precautions when using diamond cutting pieces:

First, it is necessary to check whether the accessories are complete before cutting, and drop lubricating oil on the machine. The operator cannot operate directly, but must wear a protective sleeve to improve the production safety factor.

Second, when cutting, the marble needs to be placed flat, and it is best to be parallel to the ground, so as to ensure that the cutting will not be skewed, causing waste of stone. Before cutting, draw a horizontal line at the cutting position to reduce cutting error.

Third, if the equipment makes abnormal noise or shakes during cutting, stop operating the machine immediately, and then cut off the power for maintenance.

Fourth, when cutting marble, the cutting speed should not be too fast, otherwise the marble will be damaged. If the cutting speed is too fast, excessive heat will be generated due to friction and the cutting pieces will be worn. If the cutting blade is deformed, it can no longer be used and needs to be replaced with a new one.

Jingstar Diamond Tools specializes in manufacturing various of diamond tools in China. Our main products are diamond segments, saw blades, diamond grinding disc, calibration rollers, diamond wire saws, core drill bits, floor grinding pads, polishing pads, profiling wheels, diamond abrasives tools.

Our factory is located in Quanzhou, where is the main area producing most diamond tools in China. It is about one hour by car from Xiamen to Quanzhou.

Post time: Nov-11-2022